M3V

Maximum beam distance 192,500 lux
3000 LED lumen powered by Luminus SFT70 LED
Type-C USB rechargeable; Battery level indicator
Three brightness levels; Five hidden AUX modes; Programmable tailcap strobe feature
Pre-select any output for start-up; Momentary on-off
All brightness levels are programmable
Tactical forward clicky tailcap switch
Uses protected 21700 li-ion battery (included)
956 yards / 877 meters maximum beam distance
Up to 1.8 hrs on MAX output, 400 hrs on low output

Category: M series

Description

Performance

Battery

Battery Type	21700*1
Battery included	Yes
Built-in rechargeable	Type-C USB
Operating voltage	2.7V – 4.2V
Battery requirement	Battery Diameter (21-21.8mm) / length (70-75mm) \| Button-Top \| Protection PCB (10A up)

Control

Control Type	Tactical forward clicky tailcap switch
Hidden auxiliary outputs	Flash/Strobe(Constant)/S.O.S./Strobe(Var)/Beacon(Long)/Beacon

Dimensions

Constructions

Flashlight Body Material	HAIII hard anodization aerospace aluminum
Lens	Harden waterwhite glass lens with anti-reflective coating on both side
Reflector	Smooth aluminum reflector
Waterproof	IPX-8

Picture gallery: Download
User manual: Download

How to use?

Basic operations:

Turn on the light by pressing the tailcap button until it clicks.
Twist the head to select between three output levels.
Pre-selected output level before turning on the light.
Cycle through auxiliary modes: tight the head (1st level), and loose the head (3rd level) and then tight the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loose the head to quit.

Advanced operations:

Choose one of the four levels as the default medium output: Switch to medium output and turn the flashlight on and off for 20 times to cycle through the next output setting.
Choose one of the four levels as the default low output: Switch to low output and turn the flashlight on and off for 20 times to cycle through the next output setting.
Choose one of the four output settings (including tailcap strobe toggle) as the default max output: Switch to max output and turn the flashlight on and off for 20 times to cycle through the next output setting.

Charging:

Remove the waterproof cover and insert the included type-c charging cable to charge the battery.
During charge, switch on the flashlight switch at the tailcap to charge to 100%. Leaving the switch in off position will only charge the battery to 80% (extend battery life cycle).
Blue side LED indicates the battery is being charged. It reports charging percentage by blinking.
Time to fully charge a depleted 21700 5000mAh battery is 3-4 hours.